Linux для всех - это девиз Clarke-Tech ET9000. Немецкий производитель Clarke-Tech представила новую модель ET 9000 на основе системы Linux операционной Enigma2 спутниковый тюнер Twin. Новое поколение Clarke-Tech ET9000 так, что она становится очень конкурентоспособным для Vu+ Duo или Dreambox.
С открытым исходным кодом Linux OS (Enigma2) 400 МГц MIPS Broadcom 7405 процессор Twin DVB-S2 тюнера (Silicon тюнер) Аппаратное декодирование MPEG2 / H.264 (DVB-совместимый) 16-значный буквенно-цифровой дисплей VFD 2x Общий интерфейс слот для модуля декодирования 2 читателя (Conax Embedded) Сетевой интерфейс 10/100 Мбит / с Ethernet 3x USB 2.0 (1x передняя панель / задняя панель 2) 1 х внутренний разъем SATA для подключения HDD (жесткий диск не входит в комплект) Экстен 1x E-SATA разъем 1x последовательный интерфейс V.24/RS232 HDMI разъем 2x Scart 1 компонентный выход YPrPb 1 х оптический S / PDIF Изменение каналов быстрее чем за 1 секунду EPG (электронный программный гид) Поддержка плагинов (JPEG, MP3, DivX ...) поддержку своих списков каналов Многоязычный OSD, поддержка скинов полностью автоматический и ручной поиск каналов Videotext, телетекст DiSEqC 1,0, 1,1 и 1,2 Видео:
Видео-разрешение (720 х 576 линий), 576p, 720p, 1080i Видео декодирования совместимых с MPEG-2, MPEG-4 Входная скорость потока 2-45 Мсимв / с S / N> 53 дБ Аудио:
Декодирование AC 3, MPEG-4 (HE-AAC), MPEG-1 Layer 1, 2 и 332/44.1/48 кГц S / N> 65 дБ Потребление:
Предупреждение всем владельцам оборудования ( ET - 9000 )
Никогда не следует удалить батарею устройства, как устройство будет терять свою память и нужно будет перепрограммировать в этом случае заводе и этот процесс занимает от четырех недель, как вам нужно нести расходы, связанные перепрограммированием
ET9000 HDF-Teamimage based on OpenPLi2.0 vom 05.06.2011
Clark-tech ET9000 Image v2 basierend wie immer auf dem bewährten PLi. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten.
Nach dem Flashen wird automatisch ein Addon Pack installiert. Solange steht auf dem Bildschirm "First Boot please wait". Je nach Leitung dauert das einige Minuten. Also nicht ungeduldig werden oder abbrechen. Wenn die Box nicht am Internet hängt wird dieser Vorgang übersprungen. Das Firstboot Paket kann auch später noch in der HDF-Toolbox nachinstalliert werden. Im Firstboot Paket sind EMU's Picon's, Plugin's, Skin's enthalten.
Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - Bitrate Viewer Grün - Submenü Grün Lang - frei Gelb - Timeshift Gelb Lang - Mount Infos Blau - Erweiterungen Blau Lang - Zap-History Info - aktuelles Sender EPG Guide - Cool Multi Guide Info Lang - Zap History Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen vkey - Zugriff auf aufgenommene Filme
EMUs und Softcams: Die Configs liegen unter /var/keys bzw. unter /etc.
Отправлено: 06.06.11 08:01. Заголовок: Так и не запустил эт..
Так и не запустил этот имидж,HDF ! Бутлого стоит и всё. Если у кого пошло ,отпишитесь пож. А у BH - 1.43 кнопка Стэнбая не работает,надо keymap.xml добивать её.
ET9000 HDF-Teamimage based on OpenPLi2.0 vom 11.06.2011
Clark-tech ET9000 Image v3 basierend wie immer auf dem bewährten PLi. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten.
Wichtig!!! Aktueller Bootloader muss installiert sein. Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Danke an janosch. Der Bootloader im Anhang ist der aktuelle Loader welche bis zu 100MB Flash unterstützt.
Nach dem Flashen wird automatisch ein Addon Pack installiert. Solange steht auf dem Bildschirm "First Boot please wait". Je nach Leitung dauert das einige Minuten. Also nicht ungeduldig werden oder abbrechen. Wenn die Box nicht am Internet hängt wird dieser Vorgang übersprungen. Das Firstboot Paket kann auch später noch in der HDF-Toolbox nachinstalliert werden. Im Firstboot Paket sind EMU's Picon's, Plugin's, Skin's enthalten.
Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - Bitrate Viewer Grün - Submenü Grün Lang - frei Gelb - Timeshift Gelb Lang - Mount Infos Blau - Erweiterungen Blau Lang - Zap-History Info - aktuelles Sender EPG Guide - Cool Multi Guide Info Lang - Zap History Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen vkey - Zugriff auf aufgenommene Filme
EMUs und Softcams: Die Configs liegen unter /var/keys bzw. unter /etc.
Update V3.1: - komplett aktualisiert Stand 11.06.2011 (Plugins, Enigma, Picons, Senderliste) - Cool TV Guide 4.0.0 - Im MultiQuickbutton können jetzt alle Tasten verwendet werden (soweit sinnvoll) - Fullimage mit ~85MB (neuer Bootloader ist Pflicht) - für Backup auf USB Stick vorher eine Datei "backupstick" auf dem Stick erstellen (Textdatei und umbenennen).
ViX is now embedded within the image even more. A lot of settings have been moved out of the ViX menus, and incorporated within the image. Settings from previous images may not be 100% compatible, and it might be best to re-setup your image without restoring system settings for 100% reliability.
If you have previously used NetworkBrowser to mount network mounts, please remove '/etc/enigma2/automounts.xml' BEFORE tying to setup news ones.
Team ViX Enchancements
ViX Bootlogos, Radio Logo. ViX Team Spinner. ViX Team ViX_HD Skin. ViX Team softcam manager - Lots of changes have been made here. You can now choose whether you want to check whether your cams are running by pressing menu in the softcam screen. You can also check the status of your cam checks by pressing the info button. Also, lots of behind the scenes checks to ensure no restarts of cams when it is actually running. ViX Image Manager Update - This has been overhauled, and now has the option of creating a schedule to do daily, weekly or every 30 days backups for you. ViX Cron Manager Update - This has been updated to allow more detailed and specific cron jobs to be created. ViX Single EPG (with channel preview) - This has been updated to now support picons. ViX Release notes - This is just a little screen within the Menu -> Information -> About, that appears when you press EPG/Info button, to tell you the latest updates for the image. ViX Update Checker - This is a feature that lets you know of any available online updates by a little globe symbol in the infobar. This is set to check every 12 hours whether there are any updates for the image (can be changed in settings). If so, the icon will change from inactive to active... ViX Logs Manager - This allows you to manager your crashlogs and system logs (if enabled). If you have a crash, you can email your bugs to us directly from the image. Go to Menu -> Setup -> System -> Logs. When in the Logs Manager, you can edit the configuration to show your forum username, and your email address by pressing the Menu button. Please ensure you do this before submitting logs! ViX Settings - These are now found in the main System Menu. ViX Simple TV List - This is a simple selection to show your bouquet lists, just showing the channels and current event (if in EPG). To access the Simple TV List, do a long up/down arrow button press. You can customised it to be the default option instead of Full Screen Channel List, in which case, Up/Down buttons are reversed. It can also be set in the ViX Settings for the TV button. AutoTimer plugin integrated into image - Create an AutoTimer (Series Link), using Blue button in Current Channel EPG info. This has been updated to use threading, so that it will work in the background. No more spinning when checking for lots of timers. Default behaviour has been changed so that it does not check in standby only, and will check every 30 minutes. CCcamInfo - CCcamInfo plugin built directly in to image. OscamInfo - OscamInfo plugin built directly in to image. Blindscan Support Added - This allows you to access blindscan within the Service Scanning menu. CrossEPG - Updated to latest release to allow better EPG importing. Movie Player - Now, when playing a recorded item, you can search EPG and add Auto Timers for the particular recording. When watching your recording, press yellow to search the EPG, then press blue to add an AutoTimer.
Button Mappings
Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - Show current event. Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - IMDB Database. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. Up/Down** - Open Full Screen Channel List. Long Up/Down** - Open Simple TV List. TV Button** - Open Full Screen Channel List. Long TV Button - Open Bouquets List.
** Can be changed in ViX Menu *** Can be turned off in ViX Menu
Known Bugs
"Link-Icon" in network doesn't show up (= grey instead of green). Radio mp3 stream crashes after some time (sometimes only > 1 hour). Once that occurs, TV is also without sound. A reboot is then required. There might be a relation with Shoutcast (in use or just installed). A second subtitle in AVI, MP4 etc doesn't show up. Debugging in E2 just stops. In Partnerbox (remote TV-Player) the audiobutton causes a crash.6
Special Thanks
rytec - for his continued support. PLi Team for their great base image and allowing us to use it. zoka.cc for his Picon sets Coolman and all other developers for their plugins used in the feeds of this image. All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working
- Image based on Oe 1.6 - Kernel 2.6.18-7.4 - Drivers 16.05.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles !
- HDMI-CEC Support - BLIND SCAN Support - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300
Buttons Mapping:
OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows
Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin
much, much and more...
Egami Panel include:
- Green button and then Red button takes You to EGAMI ADDONS MANAGER
--> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url.com/catalog_enigma2.xml )
- 2x Green button takes You to EGAMI Extras
--> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd
--> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID
- Green button and then Yellow button run EGAMI FILE MANAGER
--> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON...
- Green button and then Blue button run EGAMI Scripts Panel
--> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel
Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader
DISCLAIMER THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PULBISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.
THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.
LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.
LICENSE (TERM OF USE)
THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.
ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REWOKE OF THIS LICENSE.
Отправлено: 22.06.11 20:17. Заголовок: Full Backup Image Ba..
Full Backup Image Based on the PLI with CT-panel (CT-Mod) By csm
Here is my full backup image based on the current PLI image with CT panel.
Contained in the image: - Latest driver - All the time unterstüsten WLAN Driver - Dmm-Skin (adapted) - Tuning (Astra 23, Astra 19, Hotbirt 13, Eutelsat 9) - Pli update can be executed
Image updated: 20/06/2011
Thank you to everyone who helped. Special thanks to "babsy98" and "mogli123"
Wenn ihr diese Version in unserem Image nutzen wollt dann zuerst den vorhanden MultiQuickButton löschen. Per FTP auf die Box verbinden und folgende Verzeichnisse löschen:
Jetzt Enigma neustarten. Danach könnt ihr diese Version installieren. Entweder per USB Stick oder per FTP auf die Hauptebene kopieren. Dann über die Softwareverwaltung - Lokale Erweiterungen installieren.
Zitat: MultiQuickButton: 2.7.9
2.7.9 info:
Fernbedienungstasten:
-Mark -Playlist (standard belegt mit dem MediaPlayer) -search
+ *Fix* eure MQB/Tasten( settings sichern/LocationBox ) wird nun richtig angezeigt und gesichert unter "/etc/MultiQuickButton/MultiQuickButton_et9000_settings.tar.gz"
sind nun verwend/belegbar (thx: tam2010, manyone )
angepasst für et9000
Tasten die leider nicht/oder auch noch nicht funktionieren (zwecks fehlender Key ID zuweisung) sind:
- I> slowmotion play taste - help taste (habe ich weider heraus genommen ... denn das klappte mal und mal nicht bzw eher weniger)
alle anderen tasten ausser (MENU, und den obersten STB,DVD,AUX) sind nun frei belegbar
ACHTUNG: wer das MultiQuickbutton hier benutzen möchte muss seine installierte MQB Version (falls vorhanden) bitte erst deinstallieren
p.s alle veränderten tasten/belegung/zuweisungen haben keinerlei einfluss auf das verhalten/steuerung der plugins/programme selbst ... das heisst wenn ich als bsp. auf die taste "Stop" mir den "teletext" lege und dann bspw. im "Mediaplayer" bin bliebt die taste als "Stop" funktion erhalten
mein dank für die vorhandene MQB source geht an "emanuel", "ReneW" und "plnick"
- Image based on OE 1.6 - Kernel 2.6.18-7.4 - Drivers 27.06.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles !
What's new ???
- Image include latest Front Processor - image include latest Bootloader
- Latest Drivers
-increase framebuffer acceleration memory size -always downmix audio on analog outputs -support /proc/stb/fp/was_timer_wakeup (needs frontpanel update) -vcr scart detection fix -vfd improvements -vfd: support greek and cyrillic charsets -vfd: support additional symbols (see /proc/stb/lcd/*) -pcm playback improvements -sci improvements -DVD Menu works OK - from ISO files also
- Latest GUI - Latest GUI-Plugins
- Added AC3+ / Dolby Digital + Support - Added zapUp /zapDown -> LEFT / RIGHT arrow - Added default cable.xml - thx pr2 - Added in FileManager option to play file by file -> most types of mulimedia files ( e.x 001.mts, 002.mts, 003.mts - You don't need to play one by one, it will be play from 1-3 ) - Added in File Manager < Root Directory > to make fast jump to / direcotry in Flash - Added in Mount Manager option to mount by UDP and TCP - Added animated pixmaps when We press RED to start CAM - Added in Decoding Setup -> Option to disable CI messages - Added Subtitles Menu on Subtitiles Button - Added Sleep Timer Menu on Timer Button - Added *.MTS extensions in MediaPlayer - Added Videoenhacement Plugin
- Added EGAMI BackUp Manager -> You can backup/ restore EGAMI - You can install new egami, run this plugin and it will install things like emu, configs, plugins, etc...
This tool allows You to flash by latest EGAMI Image but Keep Your favorite things inside !!!
- Updated skin by Mimi - Updated French language by Mimi - Updated French language CrossEPG by Mimi
- Fixed removing files from FLASH by EGAMI File Manager - Fixed Software Manager -> Install Local IPK - Fixed Marker - Fixed Button SAVE in FileManager Settings
- Fixed Uninstaller SoftCams fixes ( killing before removing, if running softcam is removed, fall back to Common interface mode, if user remove other softcam, running softcam is still running ) - Fixed SoftCams change- it is 2 times faster now
Installed Plugins:
- HDMI-CEC Support - BLIND SCAN Support - Videoenhacement Plugin - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300
Buttons Mapping:
OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows
Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin
much, much and more...
Egami Panel include:
- Green button and then Red button takes You to EGAMI ADDONS MANAGER
--> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url.com/catalog_enigma2.xml )
- 2x Green button takes You to EGAMI Extras
--> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd
--> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID
- Green button and then Yellow button run EGAMI FILE MANAGER
--> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON...
- Green button and then Blue button run EGAMI Scripts Panel
--> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel
Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader
DISCLAIMER
THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PULBISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.
THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.
LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.
LICENSE (TERM OF USE)
THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.
ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REWOKE OF THIS LICENSE.
EgamiBoot BETA 1.0 - ТОЛЬКО ДЛЯ ТЕХ У КОГО УСТАНОВЛЕН ЖЁСТКИЙ ДИСК (не будет работать на USB STICKS) !!!!
-. Очень легкий и простой MultiBoot плагин командой EGAMI TEAM for ET-серии recivers Для использования EgamiBoot, необходимо установить жесткий диск - HDD устройства, и отформатировать его в EXT3 формат файла и смонтировать его . Вы можете отформатировать и смонтировать устройство, Egami Devices Panel. После установки устройства, вы должны разрешить EgamiBoot, открыв его с помощью MENU->EgamiBoot->Install. через FTP программное обеспечение, вы должны загрузить один или несколько NFI или *bin (rootfs.bin) изображение image into /media/egamiboot/EgamiBootUpload, а затем в панели EgamiBoot вы должны выбрать установочного образа (зеленая кнопка). Поэтому , новая панель будет открыта, и вы сможете выбрать, какой образ вы хотите установить, перемещая стрелки влево и вправо на пульте дистанционного управления в файл опций Источник изображения. После выбора изображения для установки, путем перемещения удаленного управления стрелками вниз, вам будет предложено выбрать опцию «Название изображения», и Вы сможете писать имя образа, вы устанавливаете (она будет такой же, вы увидите в меню панели EgamiBoot после установки). Наконец, путем перемещения дистанционного управления нажатыми , вы найдете возможность выбора, если копировать настройки для нового изображения или не делать этого.
EgamiBoot поддерживает установку * NFI изображений из VU + / DM recivers и rootfs.bin файлы с ET9000
Протестировано изображений:
VU + : - BlackHole 1.6.3 - VTi 2,2 DMM : - EDG-Nemesis 2,1 - Newnigma 3.2.2 - Питер Пэн Никогда Земля 2,2 ET : -! поддержки для всех изображений
Для его использования EGAMI должны быть установлен в FLASH!
EgamiBoot BETA 1.0 - ONLY FOR PEOPLE WHO HAS GOT HARD-RIVE INSTALLED - IT WON'T WORK ON USB STICKS !!!
- Very light and simple MultiBoot Plugin by EGAMI TEAM for ET-Series recivers.
To use EgamiBoot, you need to install a Hard Drive - HDD device, and format it in EXT3 file format and mount it.
You can format and mount the device by Egami Devices Panel.
After installing your device, you have to enable EgamiBoot by opening it by MENU->EgamiBoot->Install
Now, via an FTP software, you have to upload one or more nfi or *bin ( rootfs.bin )image into /media/egamiboot/EgamiBootUpload and then into EgamiBoot panel you have to select Install Image (green button).
Therefore, a new panel will be open and you will be able to select which image you want to install by moving left and right arrows on your remote control into Source Image file option.
Once you select an image to install, by moving the remote control arrow down, you will select the Image Name option and you will be able to write the name of the image you are installing (it will be the same you will see in EgamiBoot menu panel after installing).
Finally, by moving remote control down arrow again, you will find the option to choice if to Copy setting to new Image or not to do it.
EgamiBoot support installing *NFI images from VU+ / DM recivers and rootfs.bin files from ET9000
Tested images:
VU+:
- BlackHole 1.6.3 - VTi 2.2
DMM:
- EDG-Nemesis 2.1 - Newnigma 3.2.2 - Peter Pan Never Land 2.2
If you wish to perform an online update, then you will be able to upgrade your v2.2 image to v2.2.1 via the online functions. This full image is available for those who do not have online functionality on their box, or wish to perform a full reflash...
BackupManager - Lets you create scheduled backups of your system files (not full Image like Image Manager). RestoreWizard - This a wizard that detects and restores you backup (created with BackupManager), with option to restore your extra plugins. ImageManager - Major code rewrite, now handled by Job task, view progress of image creation in extension list (blue button) ViX Menu - Added PackageManagement & Software Update, so SoftwareManager is now not needed. It is also now translatable into different languages. NetworkInadyn - Add new network setup screen Inadyn. OScam/CCam Info - Added options to show in Extension List. (the Menu item will now only show IF the softcam is installed). OnlineVersionCheck - Added option to disable online check by setting check value to '0' and set a maximun timer to 48 hours. Recording List - Added a new option in MovieList Settings to use a "Slim" list like the "Slim" Channel slection screen. EPG Graphical - This is now in core, no longer a plugin (was ViXEPG), added the option to show Bouquets on launch. EPG Menu - Add Load/Save item, this allow you reload/save the EPG cache. E2-Plugin's - Updated all to plugin's to the latest GIT from PLi. ZAP Timer - This will create a zap timer (rather than a recording timer) for the selected event in the EPG/Single EPG etc. To activate this, select the event from the EPG, and do a long button press on the record button. This is a non-configurable timer, so will use all defaults, and just set the record to a zap, rather than a record. When adding a zap timer, the clock icon will show on the previous event. This is to do with the pre-start timer.
Fixes
SwapManager - Code cleanup, for better activation/detecion. About Screen - Updated infomation screen, better layout, more information. VFD now shows image version. EPG Search - Fix a bug where the yellow button just opened a blank EPGSearch screen instead of actually perfoming a search on the current event. Also, added 'Show History' to long yellow button press whilst in EPGSearch. EPG Cache - Updated so now it does not require 2 reboots in order to use new location. EventView - Fix GS on opening Similar List. PluginBrowser - fix it not installing picons. ShoutCast - Fixed plugin. SoftcamManager - Add Timercheck for OScam to support no username or password in Webif, fix GS when pressing coloured buttons, if no softcams installed, also code clean up. Translation - Updated NL language files. Permantent TimeShift fix and embed PTS. Updated KeyMap - Fixes a few MoviePlayer remote control issues. ViX HD skin - PNG fix for selected items in lists, Tweaked the Jobview screen, 'New Online Version' icon now flashes to remind you of an update. VIXEPG fix - The < > keys for jumping +/- 1 day. NetworkBrowser - fix GS when creating CIFS mounts. RemoteSetup fix GS when showCoolTVGuide is selected.
Button Mappings
Short Red** & *** - Show current channel EPG info (ViX Single EPG). Long Red*** - Show current event. Short Green** & *** - Timers. Long Green*** - AutoTimer Timers. Short Yellow*** - EPG Search. Long Yellow*** - IMDB Database. Short Blue - Extensions. Long Blue*** - Plugins Menu. EPG - Opens ViX EPG. Left/Right** - Opens ViX QuickEPG. Left/Right** - Opens ViX QuickEPG. Up/Down** - Open Full Screen Channel List. Long Up/Down** - Open Simple TV List. TV Button** - Open Full Screen Channel List. Long TV Button - Open Bouquets List.
** Can be changed in ViX Menu *** Can be turned off in ViX Menu
Known Bugs
Second subtitles in AVI, MP4 etc often need a stepskip to enable them to show up. Shoutcast has no genrelists and menu is not working.
Special Thanks
rytec - for his continued support. PLi Team for their great base image and allowing us to use it. zoka.cc for his Picon sets Coolman and all other developers for their plugins used in the feeds of this image. All of the ViX Beta team for their hours of testing and dedication on getting this image and DTT working
- Image based on OE 1.6 - Kernel 2.6.18-7.4 - Drivers 27.06.2011 - Most of USB Wifi Dongles should works - Most of USB Tuners - DVB-C / DVB-T / DVB-S2 should works - UP to 2 dongles !
What's new ??? in v 1.2
- EGAMI Backup Panel - now you can have severals backup of the EGAMI Image on severals connected devices to your STB - all backups are dated - so when you will make backup it will have new format:
20110712_EGAMI_Backup.egi
- Egami Backup Panel -> When user makes backup - it is named like: DATE_Egami_BACKUP.egi - Egami Backup Panel -> Support for more than one backup on connected devices - user can choose which Backup he wants to restore - Egami Backup Panel -> Fixed Restore/Backup MultiQuickButton and CrossEPG ( About CoolEPG Restore - not done, because it install converters, it is not suitable to make for each plugin special backup logic )
- Also you can choose which backup you want to restore by moving UP/DOWN and after choose pressing BLUE button - Added text to inform user to press OK to reboot after Restore - Added default picon turned on as Reference read from /media/hdd/picon - Fixed user Add-on - Some Blue Panel skin improvements ( now it is listbox, not any more config ) - Some Blue Panel emu list changes - Samba conf workgroup changed to "workgroup" as a default
- Image include latest Front Processor - image include latest Bootloader
- Latest Drivers
-increase framebuffer acceleration memory size -always downmix audio on analog outputs -support /proc/stb/fp/was_timer_wakeup (needs frontpanel update) -vcr scart detection fix -vfd improvements -vfd: support greek and cyrillic charsets -vfd: support additional symbols (see /proc/stb/lcd/*) -pcm playback improvements -sci improvements -DVD Menu works OK - from ISO files also
- Latest GUI - Latest GUI-Plugins
- Added AC3+ / Dolby Digital + Support - Added zapUp /zapDown -> LEFT / RIGHT arrow - Added default cable.xml - thx pr2 - Added in FileManager option to play file by file -> most types of mulimedia files ( e.x 001.mts, 002.mts, 003.mts - You don't need to play one by one, it will be play from 1-3 ) - Added in File Manager < Root Directory > to make fast jump to / direcotry in Flash - Added in Mount Manager option to mount by UDP and TCP - Added animated pixmaps when We press RED to start CAM - Added in Decoding Setup -> Option to disable CI messages - Added Subtitles Menu on Subtitiles Button - Added Sleep Timer Menu on Timer Button - Added *.MTS extensions in MediaPlayer - Added Videoenhacement Plugin
- Added EGAMI BackUp Manager -> You can backup/ restore EGAMI - You can install new egami, run this plugin and it will install things like emu, configs, plugins, etc...
This tool allows You to flash by latest EGAMI Image but Keep Your favorite things inside !!!
- Updated skin by Mimi - Updated French language by Mimi - Updated French language CrossEPG by Mimi
- Fixed removing files from FLASH by EGAMI File Manager - Fixed Software Manager -> Install Local IPK - Fixed Marker - Fixed Button SAVE in FileManager Settings
- Fixed Uninstaller SoftCams fixes ( killing before removing, if running softcam is removed, fall back to Common interface mode, if user remove other softcam, running softcam is still running ) - Fixed SoftCams change- it is 2 times faster now
Installed Plugins:
- HDMI-CEC Support - BLIND SCAN Support - Videoenhacement Plugin - Web Interface - MyTube Player - FAN Setup - OSD 3D Setup - OSD Position setup - Cross EPG SVN 300
Buttons Mapping:
OK button = LITE SKIN ( need to be turned on on GREEN PANEL -> EXTRAS -> OSD SETTINGS ) OK button x 2 = Extra Info Skin Blue button = EGAMI Blue Panel Blue button and then Yellow button = INFO Panel Blue button and then Blue button = EGAMI Settings Blue button long press = Extensions Yellow button = Time Shift Green button = EGAMI Green Panel Green button long press = Subservices Green button and then Red button = ADDONS Green button x 2 = EGAMI Settings Green button and then Yellow button = FILE MANAGER Green button and Blue button = SCRIPTS Button Red = EPG List Button PIP = Turn ON / OFF PIP Button PIP long press = PiP Menu - Move/Switch Windows
Infobar: - CAM Name - ECM INFO - NETCARD INFO - CA INFO - TUNER INFO - CHANNEL INFO - NEXT EVENT INFO ( in channel list !! ) - AnalogicClock renderrer - Lite and Full infobar skin
much, much and more...
Egami Panel include:
- Green button and then Red button takes You to EGAMI ADDONS MANAGER
--> Download Egami Addons - Download extensions from Egami Server --> Manual Egami Addons Install - Install packages from /tmp --> Remove Egami Addons - Remove installed packages --> Download GUI Addons - Download CVS Extensions --> User Addons - Here You can install extensions from Your own server ( put in /etc/user_addon.txt url to catalog: example: http://your-feed-url.com/catalog_enigma2.xml )
- 2x Green button takes You to EGAMI Extras
--> Kernel Modules Manager - start/stop kernel modules --> Devices Manager - here You can easily mount/map/format/settings Your extra memory storages like HDD, USB. REMEMBER TO MOUNT HDD BEFORE RECORDING !!! --> Services Panel - here You can Start/Stop/Check Status/Setting up: + NFS Server + HTTPD + Inadyn + Cron + DjMount ( UpNp Client ) + uShare ( UpNp Server ) + Syslog + Samba + OpenVPN + FTP + Telnet + Pcscd
--> Mount manager - here You can mount Your networks share - CIFS/NFS --> Decoding Setup - You can disable some messages like eg. "Show Tune failed info?" --> Swap File settings - make Your swap file --> OSD Settings - Here You are able to Turn ON / OFF options like: Lite Skin, Orbital position, cam name, provider, crypt info in Infobar, Pernamental Clock, Picons and much much more... --> Stream Information - Get PAT/CAT/NIT/EIT/ECM Info --> USB Wifi & Tuner Dongles Setup - in this panel You can easily see what kind of Wifi or Tuner ( DVB-c/t/s2 ) you have connected to box and load drivers. The most complete info ever: Manfacturer, Vendor ID, ProID
- Green button and then Yellow button run EGAMI FILE MANAGER
--> You can Move/Copy/Remove/Rename Your files inside Your Box ! --> You can Create New Directory/New Text File/New Symlink ! --> You can change Permission of the files ! --> You can play all movies and music directly from Egami File Manager ! --> You can watch Your pictures from holiday directly from Your USB dongles by Egami File Manager ! --> You can start SHELL scripts --> You can start PYTHON scripts --> You can view most type of files by pressing OK --> 1st EVER - You can download Subtitles to Your movies stored inside your HDD - it finds subtitles exacly to version of the movie You have ! - available languages - ENGLISH, POLISH - more will come SOON...
- Green button and then Blue button run EGAMI Scripts Panel
--> You can run all scripts from /usr/scripts/ --> You can easily add new scripts to /usr/scripts/NAME_smartscript.sh and it will be visible in Scripts Panel
Credits Thanks to the group of Beta Testers. Thanks to Rytec for providing us with the server with all epg.dat files. Thanks to SiF Team for the nicest EPG plugin ever - CrossEPG Thanks to Skaman from SiF Team for extuner and usbloader
DISCLAIMER
THE EGAMI IMAGE IS BASED ON THE OFFICIAL FIRMWARE PUBLISHED BY XTrend AND IN ACCORDANCE WITH THE LAW IT CONTAINS ONLY SYSTEM ADDITIONS & GRAPHIC CHANGES.
THE EGAMI IMAGE DOES NOT CONTAIN ANY EMULATOR, K E Y S, SOFTCAMS OR OTHER SYSTEM FOR VIEWING PAY - TV WITH OR WITHOUT A PAID SUBSCRIPTION.
LASTLY, THE EGAMI IMAGE DOES NOT CONTAIN ANY SYSTEM TO DOWNLOAD PLUGINS OR EMULATORS FROM EXTERNAL SERVERS OR SOFTWARE THAT MAY BE USED FOR ILLEGAL PURPOSES SUCH AS CARD SHARING.
LICENSE (TERM OF USE)
THE EGAMI IMAGE IS ISSUED FOR THE FREE USE FOR ALL USERS PROVIDED THAT IT WILL NOT BE CHANGED IN ANY WAY AND THAT IT WILL ONLY BE USED FOR LAWFUL PURPOSES.
ANY CHANGES OR ADDITIONS TO EGAMI IMAGE THAT INVOLVE UNLAWFUL USE OF THE IMAGE SUCH AS CARD-SHARING AND EMULATORS ARE NOT ALLOWED AND CAUSE THE REVOKE OF THIS LICENSE.
ET9000 HDF-Teamimage v4 based on OpenPLi2.1 vom 30.07.2011
Clark-tech ET9000 HDF Teamimage v4 basierend wie immer auf dem bewährten PLi nur diesmal OpenPLi 2.1. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten.
Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - frei (Änderung über MultiQuickButton) Grün - Submenü Unterkanäle Grün Lang - frei (Änderung über MultiQuickButton) Gelb - frei (Änderung über MultiQuickButton) Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungen Blau Lang - Plugins Info - aktuelles Sender EPG Info Lang - Cool Single Guide Guide - Cool Multi Guide Guide lang - Cool Easy Guide Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen < > - Zap-History Filelist - Movie List Playlist - Media Player Timeshift - startet sofort Timeshift Vkey - Zugriff auf diverse installierte Plugins Vkey lang - TV Charts Plugin Mark - Timer Editor Search - EPG aktueller Sender Pip - Auswahl Pip und Pip Zap Modus
enthaltene Plugins / Addons: - SHOUTcast mit funktionierender Aufnahme - MultiQuickbutton aktuelle Version - YTTrailer (TV, TEXT, RADIO Taste im EPG Overview um Trailer zum aktuellen EPG Eintrag zu sehen) - Youtube Player (auch als Grundlage für YTTrailer) - Sport Portal (Formel 1und Fussball) - TV Charts (aktuelle Quoten der TV Charts Benutzer) - Wetter Informationen - Bitrate Viewer (lang rot und Vkey) - Cool Multi Guide 4.0.0
Wichtig!!! Aktueller Bootloader muss installiert sein. Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader welcher bis zu 100MB Flash unterstützt und den Splash Screen hat.
ET9000 HDF-Teamimage v4.1 based on OpenPLi2.1 vom 01.08.2011
Clark-tech ET9000 HDF Teamimage v4 basierend wie immer auf dem bewährten PLi nur diesmal OpenPLi 2.1. Den Ordner et9000 auf einen USB-Stick entpacken, anstecken und den Receiver am Schalter neustarten. Entweder wird das Image im Display selber angeboten oder ihr müsst beim Starten die Menü Taste gedrückt halten.
Hinweise zur Bedienung: Rot - Timer Editor Rot Lang - frei (Änderung über MultiQuickButton) Grün - Submenü Unterkanäle Grün Lang - frei (Änderung über MultiQuickButton) Gelb - frei (Änderung über MultiQuickButton) Gelb Lang - frei (Änderung über MultiQuickButton) Blau - Erweiterungen Blau Lang - Plugins Info - aktuelles Sender EPG Info Lang - Cool Single Guide Guide - Cool Multi Guide Guide lang - Cool Easy Guide Exit - Virtual Zap mit PIP Programm +/- schnelles zappen Steuerkreuz hoch/runter - Channel Selection Steuerkreuz rechts/links - schnelles zappen < > - Zap-History Filelist - Movie List Playlist - Media Player Timeshift - startet sofort Timeshift Vkey - Zugriff auf diverse installierte Plugins Vkey lang - TV Charts Plugin Mark - Timer Editor Search - EPG aktueller Sender Pip - Auswahl Pip und Pip Zap Modus
enthaltene Plugins / Addons: - SHOUTcast mit funktionierender Aufnahme - MultiQuickbutton aktuelle Version - YTTrailer (TV, TEXT, RADIO Taste im EPG Overview um Trailer zum aktuellen EPG Eintrag zu sehen) - Youtube Player (auch als Grundlage für YTTrailer) - Sport Portal (Formel 1und Fussball) - TV Charts (aktuelle Quoten der TV Charts Benutzer) - Wetter Informationen - Bitrate Viewer (lang rot und Vkey) - Cool Multi Guide 4.0.0
Wichtig!!! Aktueller Bootloader muss installiert sein. Bootloader im Anhang herunterladen und per USB-Stick wie ein Image installieren. Der Bootloader im Anhang ist der aktuelle Loader welcher bis zu 100MB Flash unterstützt und den Splash Screen hat.
Отправлено: 09.08.11 23:02. Заголовок: Bootloader for ET900..
Clarke-Tech Support Image V2
Wichtig:
Installation: Bevor du das Image erstmalig installierst (flasht), solltest du den Bootloader aktualisieren. Wenn du dies nicht machen würdest, startet das Image nicht (außer du hast bereits vorher einen aktuellen Bootloader installiert.) Der Bootloader muss nur einmalig geflasht werden, danach kannst du das CT-Image jederzeit und ohne Bootloader Aktualisierung neu flashen. Das Image wird dann ohne Fehler starten. Bootloader Download http://www.clarke-support.com/Forum/...9&d=1312638796
Basierend auf dem OPENPLI Nightly Build vom 02.08.2011
Clarke-Tech Image-Verbesserungen: - Clarke-Tech HD Lava Skin mit PIG (Ein aktuelles Bild vom ausgewählten Sender - in vielen Menüs) - Clarke-Tech Bootlogos und Radio Logo - Clarke-Tech Panel
Bitte betrachte die Bilder am Ende dieses Beitrags, um bereits jetzt einen kurzen Überblick über die Neuerungen zu bekommen.
- Sysinfopanel (Darstellung von Systemeigenschaften) - HDMI-CEC Support mittels Plugin - Sundtek USB-DVB/C/T/S2 Unterstützung
- WLAN fixes und Unterstützung für 80211b/g/n Ralink basierende USB-Sticks (rt871x) - Running "broken" Shellscript (as Cronjobs) will work - Akustikpatch (benötigt eine HDD die akustik-management unterstützt, bitte nötigenfalls den Festplatten-Hersteller kontaktieren.)
Bekannte Bugs
- WLAN mit dem Chipsatz rt3070,rtl8187
Highlights:
-Daemon Manager. Was ist das? Ein Daemon ist ein im Hintergrund laufender Prozess. Dieser Daemon erfordert ein Start-/Stopscript - dieses Script muss ausführbar sein (chmod 755) und sich im Ordner /etc/init.d befinden, der Name muss immer mit "dmon." beginnen. - Blindscan Support - CT Nachrichten-Feed (Erfahre alles Wichtige rund um deinen Boxen-Hersteller CT.)
Achtung! Um eure gesichteren System-Einstellungen (u. A. Programmlisten, Satelliten) wieder nutzen zu können, bitte nicht den Assistenten nach dem Neuflash verwenden, sondern macht dies anschließend über das CT Panel -> Tools -> System Einstellungen -> Sicherung/Wiederherstellung. So könnt ihr eure gewünschten Einstellungen "zurückspielen", und auch neue Sicherungen anlegen. Vielen Dank!
Besonderer Dank:
pcd (Hauptentwickler) wallie2000 (unterstützender Entwickler) Clarkemaster(Skins,Bootlogos) All Betatesters (Coolman, CoolST, csm, dispatcher, tam2010, z-pg-3) mogli123 (optimierte MultiQuickButton-Version) Ein Große dankeschön an ClarkeBoss
Все даты в формате GMT
3 час. Хитов сегодня: 16
Права: смайлы да, картинки да, шрифты нет, голосования нет
аватары да, автозамена ссылок вкл, премодерация откл, правка нет